Star Tent
Two shapes to choose from100% waterproof
The star tent is open on all sides, holds large crowds, takes a full-coverage canopy print and is visible from afar. Sizes from 3×3 to 16×21 m.
Categories Tents · Best for กลางแจ้ง (Outdoor)
Size
From-
Choose a size to see the price
This link was created a while ago. Prices may have changed.
Scan with your phone to send this spec to us on LINE
Spec code:
Copy the link and send it to us on LINE. We will reply with a quote and a design proof.
Made in 10–15 working days
Nationwide delivery
Free design, proof before production
Tax invoices available
The star tent: the centrepiece of an outdoor event
Open on every side, holds a large crowd, full-coverage canopy print
The star tent makes your outdoor event the focal point from a long way off. It is open on every side, holds a large crowd, and takes a full-coverage print across the whole canopy.
An aluminium mast 76 mm in diameter with a 3 mm wall, with a mechanism that raises the mast and tensions the canopy. A galvanised steel mast base. A 600D polyester canopy, 100% waterproof, with reinforced, taped seams.
Two shapes to choose fromSquare with one mast, rectangular with two
100% waterproof600D fabric, 240 gsm, taped seams
A proper team set-up3–4 people, about 30 minutes
Photos from our customersReal work, on site
A mast and structure built for big eventsAluminium, 76 mm, 3 mm wall
The main mast is aluminium, 76 mm in diameter with a 3 mm wall, with a mechanism that raises the mast and tensions the canopy in one step. The mast base is galvanised steel, the canopy arm ends are solid aluminium, and the mast head is fixed to the canopy at the factory.
- Aluminium mast, 76 mm, 3 mm wallWith a mechanism that raises the mast and tensions the canopy
- Galvanised steel mast baseCarries the mast and pins to the ground
- Solid aluminium arm endsThe points that take the most tension in the canopy
A waterproof canopy with full-coverage printPolyester 600D, 240 g/sq m
The canopy is 600D polyester, 240 g/sq m, 100% waterproof, with reinforced, taped seams. It takes a dye-sublimation print across the whole canopy, included in the price.
- 100% waterproof600D fabric, 240 g/sq m
- Reinforced, taped seamsEvery point where water could get in is sealed at the sewing stage
- Full-coverage canopy printDye sublimation, included in the price
Printing and logo placementDye sublimation - full-coverage canopy
The whole canopy is printed by dye sublimation, so the ink goes into the fibres instead of sitting on the surface. The price shown already includes the full-coverage print.
What is in this kit
- Aluminium poleDepending on the shape ordered: one for square, two for rectangular
- Mast baseGalvanised steel, with ground pins
- Canopy with aluminium arm endsFull-coverage print to the approved design
- Ground anchors for the canopy arm endsLarge and heavy-duty, with guy lines
- Anchor pullerFor pulling the anchors out after the event
- Arm spacing gaugeFor setting the arms out to shape before the anchors go in
- HammerFor driving the anchors and pins
- A 140 cm mast bag and a canopy bagSeparate bags, for transport
- Free graphic designA proof before production, revised until you approve it
Setup guide
1
Measure out and open the canopy armsUse the spacing gauge supplied to set the arm ends out to shape before any anchor goes in.
2
Drive in the pegs and tie off the guy linesDrive an anchor at every arm end, then tension the guy lines evenly all round the tent.
3
Raise the mast and tension the canopyRaise the central mast with its built-in mechanism and the canopy tensions at the same time. 3–4 people, about 30 minutes.
Choose the right size for your event13 sizes in 2 shapes
Choose the size in the options at the top of this page.
Square: one mastOne central mast
Rectangular: two mastsTwo central masts
Every size has an eave height of about 2.1 m. Capacity and weight figures are estimates for planning space and transport, not certified values.
Booth sets often ordered together
This product works well as part of a set
- 3×3 m pop-up tent, SUB
- 3 m back wall, SUB
- 3 m half walls, SUB, both sides
- 180 cm booth table, SUB
- 2 beach flags, size S, with 25 L water weights
Set price from ฿19,676
- 3×4.5 m pop-up tent, SUB
- 4.5 m back wall, SUB
- 3 m half walls, SUB, both sides
- 180 cm booth table, SUB
- 2 beach flags size L and 2 size M, each with a 25 L water weight
Set price from ฿29,682
- 3×6 m pop-up tent, SUB
- 6 m wall, SUB
- 3 m half walls, SUB, both sides
- 180 cm booth table, SUB
Set price from ฿23,590
How to order
- 1Brief usShare your requirements and get expert advice on LINE
- 2Approve designWe recommend the right products and prepare your design
- 3ProductionProduction starts in our own factory
- 4DeliveryFast delivery, ready to use on arrival
Real work for our customersExamples of real use
Planning something big? We design the artwork for free before production.Add us on LINE
Frequently asked questions
How many people does it hold, and how long does it take to set up?
See the size table above. Every size lists how many people it holds standing and seated, from about 13 standing (3×3 m) up to about 504 standing (16×21 m). The star tent is open on every side, so you can use all the space under the canopy. Set-up takes a team of 3–4 people about 30 minutes per tent.
Can it stand on concrete or another hard surface?
Yes, but it is anchored differently. On soil or grass, drive in the ground anchors supplied with the kit (they are very large, so we include an anchor puller too). On concrete or another hard surface, the customer needs to drill or drive the same anchors into the ground themselves. We do not supply ballast weights.
Are walls available?
This model has no walls. The star tent is designed to stay open on every side.
Does the price include the printing?
Yes, it is included. The price shown includes a full-coverage dye-sublimation print across the canopy, and we design it for free, always sending a proof before production. The star tent is sold printed only. If you want one without a print, message us on LINE and we can talk it through.
How many days does production take?
Production takes 10–15 working days, counted from the day the artwork is approved and the deposit is paid. The star tent uses far more fabric than our other products, so it takes longer than standard. You can order from 1 tent.
Can lighting be fitted to the mast?
LED lighting can be fitted to the mast, but it is not included in the kit and we do not sell it. Customers are welcome to arrange their own.
